Buying a GT550J

Post your problems / information on the smaller GT Models here
User avatar
Alan H
Posts: 12116
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Buying a GT550J

Post by Alan H »

Oh, you mean like this one.......
Nearly 4.jpg
viewtopic.php?f=16&t=9495&hilit=yeti
Nearly 3.jpg
Nearly 2.jpg
Nearly 1.jpg
And now with these on too! (As well as the correct points cover.....) :lol:
20201008_180844.jpg
All marked as 'nearly' as they were taken a fortnight ago, before it was ridden down the street.
Last edited by Alan H on Sat Oct 24, 2020 11:28 pm, edited 2 times in total.
Proof that four strokes are over complicated
User avatar
Alan H
Posts: 12116
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Buying a GT550J

Post by Alan H »

But you wouldn't get a good 'un like that, with a fully detailed rebuild - like that - for anywhere near 5 grand!! :lol:
And anyone that thinks there should be a grab handle on a 550J, here's a picture of my original 550J on the 26th August 1972 with a 380 (J) rack on as there were no 550 custom parts available then, as mine was the first privately registered one in the UK, or so I was told at the time...... 8-)
1972.jpg
1972.jpg (9.14 KiB) Viewed 271 times
Proof that four strokes are over complicated
barney01
Posts: 3120
Joined: Wed Sep 26, 2012 7:33 pm
Location: Prestatyn.Wales

Re: Buying a GT550J

Post by barney01 »

And here is mine in a proper colour :lol:
Attachments
2020-10-25 06.47.00.jpg
NO SMOKE .......NO POKE
boyoink
Posts: 19
Joined: Sat Apr 04, 2020 7:04 pm

Re: Buying a GT550J

Post by boyoink »

I have a 550J that i would consider selling. 07759271519 if your interested
User avatar
canaletto5
Posts: 5228
Joined: Tue Jul 23, 2013 8:43 pm
Location: Derbyshire

Re: Buying a GT550J

Post by canaletto5 »

Did you solve your problem with the left pot not firing?
boyoink
Posts: 19
Joined: Sat Apr 04, 2020 7:04 pm

Re: Buying a GT550J

Post by boyoink »

Yeah if your reply is for me. It turned out to be the contact within the six pin block connector that feed the coils,
Post Reply