Carburettor
-
- Posts: 40
- Joined: Thu Jan 14, 2021 7:54 pm
Carburettor
Can anyone help please!as i reassembled the carburettors one of the arms broke as you can see in the picture has anyone got one that they are willing to sell or know where i could get one it would be much appreciated
Dave
- Harrymail
- Posts: 639
- Joined: Thu Jul 07, 2016 8:35 pm
- Location: East Yorkshire
Re: Carburettor
To get you by, you can pack the bolt out with some small washers of the appropriate size and thickness. The fix works well, and if you put it on the middle carb it can't be seen. They only need a very light tighten to hold in place, as the woodruff key stops any rotation.
Paul
Paul
Currently without a GT, but looking
2003 Yamaha Fazer 600 Blue
2020 Triumph Street Twin Red
1968 BSA Bantam Sports Red
2003 Yamaha Fazer 600 Blue
2020 Triumph Street Twin Red
1968 BSA Bantam Sports Red
-
- Posts: 40
- Joined: Thu Jan 14, 2021 7:54 pm
Re: Carburettor
Ok thanks never thought of that
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Carburettor
Failing that, fit a fuel injection setup.
Should't cost more than 'a lot' and mentally shorten your life by a millennia.....
Hope this helps. ........
Should't cost more than 'a lot' and mentally shorten your life by a millennia.....
Hope this helps. ........
Proof that four strokes are over complicated
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
- stevewharton
- Posts: 2152
- Joined: Mon Jul 05, 2010 11:01 am
- Location: Grimsby, Lincolnshire.
Re: Carburettor
Look, my paintwork hasn't got "Fish scales" they're "Dragon scales" right!!! However, after some thought, I will accept "Black Marlin" or "Swordfish", but definitely not "Haddock" or "Cod".
-
- Posts: 40
- Joined: Thu Jan 14, 2021 7:54 pm
Re: Carburettor
Thanks Paul that worked a treat