T500 10mm crankcase Bolt Torque Settings

Post your problems / information on the smaller GT Models here
Post Reply
1531
Posts: 109
Joined: Sun Dec 30, 2012 2:55 pm
Location: Northumberland

T500 10mm crankcase Bolt Torque Settings

Post by 1531 »

Hi
Has anyone got the torque setting figure for the 10mm crank case bolts, the manual states the 6mm @ 7 lb-ft and 8mm @ 14 lb-ft but nothing for the 10mm bolts.
Thanks in Advance
Dave
User avatar
PaulD738
Posts: 3962
Joined: Thu Sep 25, 2014 6:57 pm
Location: Warrington Cheshire

Re: T500 10mm crankcase Bolt Torque Settings

Post by PaulD738 »

Is that the head size or size of the thread?
They're rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad 8-)

I started out with nothing and I’ve got most of it left!
1531
Posts: 109
Joined: Sun Dec 30, 2012 2:55 pm
Location: Northumberland

Re: T500 10mm crankcase Bolt Torque Settings

Post by 1531 »

Sorted Paul,
Was advised to use the same torque setting as the 10mm cylinder head bolts.
Thanks anyway
Post Reply