Sorted the front wheel out - it was slightly binding where the 'cowl' goes over the edge of the speedo drive. Wizzed a few mm off and it fits nice. Front discs now locked with some of Ians' blingy locking tabs - back still to do. New sprocket to fit so that can be done at the same time.
Genny brushes fitted - got some of THESE (clicky) for £2.99 and as they were slightly oversized, rubbed them down slightly and fitted a treat. Only used one as plenty left on t'other.
Might buy a few and put them on eblob at a tenner apiece!!
Yep. They were about 5.5 x 6.25mm and needed to be about 4.9 (or so) mm - can't remember exactly.
Just rubbed them gently on 1200 rubbing paper and kept measuring.
Took about 5 minutes, so for the sake of a bit of time, it only cost £2.99 for two brushes, and I've still got one as a spare.
Anyone who pays more wants their bumps feeling.
Last edited by Alan H on Tue Apr 21, 2015 8:19 pm, edited 1 time in total.
Just got the paintwork back. It looks ace but unfortunately the pics don't do it full justice.
I'm highly chuffed. Just popped some of the bits on for a look, so here they are.
Hopefully, weather permitting so I can get the other stuff outside the garage, engine in this weekend. Then the fun will REALLY get under way!!