Handlebar size

The KettleClinic forum, it is free to become a member and free to use, we have additional information available to all members.
If you have not joined yet, do it now.

Please note the email for the signup should arrive within 15 minutes, if not, please check any spam or junk folders, if still not arrived please contact the forum
Post Reply
nathern
Posts: 31
Joined: Thu Jul 14, 2011 12:31 pm

Handlebar size

Post by nathern »

Hi
Could anybody tell me the std handlebar size for a uk GT750A ,mainly the rise/pullback, or a suitable aftermarket replacement?
User avatar
malky
Posts: 1096
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: Handlebar size

Post by malky »

Not sure of the dimensions but I always use Kawasaki Z1 bars and cut 3/4 " off each end - get the ones without the cable holes Z power sell them - I think they should be 31 or 32 inches wide depending on your preference
Kettletimes3
Posts: 1620
Joined: Thu May 03, 2012 12:58 am
Location: Sunny Wales

Re: Handlebar size

Post by Kettletimes3 »

22mm.7/8” in old money.
Post Reply