3 into 1

The KettleClinic forum, it is free to become a member and free to use, we have additional information available to all members.
If you have not joined yet, do it now.

Please note the email for the signup should arrive within 15 minutes, if not, please check any spam or junk folders, if still not arrived please contact the forum
Post Reply
User avatar
Filth
Posts: 33
Joined: Sun Oct 18, 2020 7:56 am
Location: Worcester M5 J7

3 into 1

Post by Filth »

Not one to be bashful but would you go out in the daylight with this hanging off your back end ?
Attachments
How much does this weigh ?
How much does this weigh ?
New old stock 3 - 1
New old stock 3 - 1
Reimo
Reimo
User avatar
Filth
Posts: 33
Joined: Sun Oct 18, 2020 7:56 am
Location: Worcester M5 J7

Re: 3 into 1

Post by Filth »

oh ,I forgot its only £2400 and weighs more than the engine............
User avatar
Alan H
Posts: 12104
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: 3 into 1

Post by Alan H »

Not much performance increase then? :lol:
Proof that four strokes are over complicated
User avatar
EvansWard
Posts: 81
Joined: Sat Apr 22, 2017 1:11 am
Location: Macon GA USA

Re: 3 into 1

Post by EvansWard »

That pipe looks industrial! Probably heavy too. What is the origin country of manufacture?
1976 Suzuki GT750
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
teazer
Posts: 1035
Joined: Mon Mar 07, 2011 8:10 pm
Location: Chicago

Re: 3 into 1

Post by teazer »

Germany. Reimo were importers or dealers for Suzuki back in the day with extensive race experience from the mid sixties at least.

"The exhaust was heavy and not very good for performance", according to an email from Reimo to Ian Sandy a few years ago.

Reimo Reinhard Motorrad GmbH
Im Stiegelsteig 6
67459 Böhl-Iggelheim
Tel. 06324-6582
Fax 06324-78986
Attachments
abp 017.jpg
A3.jpg
31838207656_c236c03c49_c.jpg
User avatar
EvansWard
Posts: 81
Joined: Sat Apr 22, 2017 1:11 am
Location: Macon GA USA

Re: 3 into 1

Post by EvansWard »

Very surprised that pipe works with the stock center stand though....

I was thinking it might be German made so thanks for the clarification teaser!
1976 Suzuki GT750
1972 Kawasaki H2 750 Mach IV
1984 Yamaha RZ350
Post Reply