Thanks Paul
Got new set of head bolts that's wot came.
Will look 4 some right ones
Gt750j project
- Alan H
- Posts: 12116
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Gt750j project
Should've got a 550. No issues with leaky cylinder heads there........
Proof that four strokes are over complicated
- slosher
- Posts: 901
- Joined: Fri Sep 23, 2011 6:55 pm
- Location: Walsall,Black Country
Re: Gt750j project
Thought it was just a flat washer & spring washer Paul What do mean by sealing washerPaulD738 wrote:The big studs should have sealing washers fitted.
Cheers Dave
GT750L
GT550L
TL1000 97s
T140V
Loctite Trained Engineer (since having the Bonnie)
GT550L
TL1000 97s
T140V
Loctite Trained Engineer (since having the Bonnie)
- Alan H
- Posts: 12116
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Gt750j project
It fits immediately above the carpet, near the ceiling light.slosher wrote: What do mean by sealing washer
Cheers Dave
Proof that four strokes are over complicated
- PaulD738
- Posts: 3963
- Joined: Thu Sep 25, 2014 6:57 pm
- Location: Warrington Cheshire
Re: Gt750j project
It seems I have given you duff informationFaststeve wrote:Got antifreeze pissing out of head stud
IMG_20200115_100840.jpg
Any ideas
Before I pull it all apart
Steve
apparently the sealing washers or dowty washers to give them their correct name are to keep rain water from getting to the studs and seizing them rather than coolant getting out.
A “kind” forum member sent me a helpful pm putting me right. I shall refrain from helping people from now on
They're rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
-
- Posts: 83
- Joined: Sat Nov 17, 2018 5:04 pm
Re: Gt750j project
That's OK Paul
Got head off and there's a crack in the
Stud hole in to the water jacket.
Going to get it sleeved from the bottom.
Well fed up off
Got head off and there's a crack in the
Stud hole in to the water jacket.
Going to get it sleeved from the bottom.
Well fed up off
-
- Posts: 56
- Joined: Wed Sep 18, 2019 9:23 pm
-
- Posts: 83
- Joined: Sat Nov 17, 2018 5:04 pm
Re: Gt750j project
Hi all
Is there room to get block off with out
Removing. Engine.
It would be easier for me if I can?
Thanks Steve
Is there room to get block off with out
Removing. Engine.
It would be easier for me if I can?
Thanks Steve
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: Gt750j project
Hi
Yes, it's tight but it will come out
Kev
Yes, it's tight but it will come out
Kev
-
- Posts: 83
- Joined: Sat Nov 17, 2018 5:04 pm
Re: Gt750j project
Thanks kev
That's G8 I get on with it
Wasn't look forward to getting the engine out
Without damage in the paint on the frame
Thanks Steve
That's G8 I get on with it
Wasn't look forward to getting the engine out
Without damage in the paint on the frame
Thanks Steve