Hi folks,
Now I’ve got a little more room i my shed, I’m planning to have a go at wheel building.
I’m fortunate that when my Kettle was restored, the then owner used stainless spokes & nipples. My 380B, not so much. I bought it’s current front wheel already newly built up, so the ad said.
I didn’t realise at the time that the rim isn’t even the correct profile, the spokes aren’t the right length (which is why the lacing pattern is nothing like it should be) or thickness & they've gone a rather nasty finish.
I’m armed with a genuine NOS rim which I bought from Reiner a decade ago, I’ve a spoke set in stainless from C Wyldes.
I’ve two questions, if anyone can advise?
-one of us here is very good at this. I’m sure I remember them posting a “how to” video. Does anyone have a link?
-I think an axle / wheel stand is vital. Does anyone have one they are willing to lend to me? I’d cover the postage if yes!
Cheers,
Mike
Wheel building & axle stand?
- yeadon_m
- Posts: 7401
- Joined: Sat Jan 02, 2010 7:10 am
- Location: Canterbury Kent
- Alan H
- Posts: 12113
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Wheel building & axle stand?
Richard will be along soon - he's the one to talk to on that subject (and others!!)
Proof that four strokes are over complicated
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
- itsnotateapot
- Posts: 1179
- Joined: Thu Feb 16, 2012 10:09 pm
- Location: Sheffield, South Yorkshire
Re: Wheel building & axle stand?
Hi Mike I use a old swing arm in a vice to true up.
Richard.
Richard.
SUZUKI GT750 L
SUZUKI T500 M
SUZUKI GT185 K
Suzuki T500 Cobra
Suzuki GTS 500 Hybrid.
Suzuki RG250.
SUZUKI T500 M
SUZUKI GT185 K
Suzuki T500 Cobra
Suzuki GTS 500 Hybrid.
Suzuki RG250.
- PaulD738
- Posts: 3963
- Joined: Thu Sep 25, 2014 6:57 pm
- Location: Warrington Cheshire
Re: Wheel building & axle stand?
I did mine using two car axle stands
They're rubbish them Jap bikes lad they won't last five minutes! you want to get yourself a nice Royal Enfield!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
A quote from my old dad
I started out with nothing and I’ve got most of it left!
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
Re: Wheel building & axle stand?
PaulD738 wrote:I did mine using two car axle stands
^^^itsnotateapot wrote:Hi Mike I use a old swing arm in a vice to true up.
Richard.
-
- Posts: 1246
- Joined: Tue Jul 13, 2010 5:36 pm
- Location: north lincolnshire
Re: Wheel building & axle stand?
Mike, I have done both mygt380 and gt750 wheels, using s/steel spokes from wyldes and the original rechromed rims. I used the excellent tutorial by OAKY'S Garage on You tube. it's still on there because I've just checked.
I found it very good and learned a lot. I managed to do both these bikes using this, but it's a few years ago now.
I didn't get them trued upmyself though, as a local cycle shop here in Scunthorpe did it for me for £5 a wheel!... that's a bargain!
best of luck with it, but Oaky's garage is the place to go on youtube.
cheers
Andy
I found it very good and learned a lot. I managed to do both these bikes using this, but it's a few years ago now.
I didn't get them trued upmyself though, as a local cycle shop here in Scunthorpe did it for me for £5 a wheel!... that's a bargain!
best of luck with it, but Oaky's garage is the place to go on youtube.
cheers
Andy
Andy;
1976 gt750A; 86 FZ750
1977gt380A
1982 z400j
1981 z650f.....1988 Sufolk punch 14"
"look;it's my bike; when you own it ,you can paint it any colour you like!"
(I once painted my Z650 PINK and had the pink panther logo on the tailpiece)
1976 gt750A; 86 FZ750
1977gt380A
1982 z400j
1981 z650f.....1988 Sufolk punch 14"
"look;it's my bike; when you own it ,you can paint it any colour you like!"
(I once painted my Z650 PINK and had the pink panther logo on the tailpiece)
-
- Posts: 3120
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
- yeadon_m
- Posts: 7401
- Joined: Sat Jan 02, 2010 7:10 am
- Location: Canterbury Kent
Re: Wheel building & axle stand?
Thanks everyone!
That video is just the ticket. I’ll build something to hold the wheel in build.
All the best,
Mike
That video is just the ticket. I’ll build something to hold the wheel in build.
All the best,
Mike
-
- Posts: 128
- Joined: Tue Jun 10, 2014 5:26 pm
- Location: under bridge J22 M60
Re: Wheel building & axle stand?
I used a black and decker work mate to locate the wheel rim on its own axle and watched a you tube how to clip a few times.
Mind you I’ve not ridden it yet might be like a clownsxbike.
Mind you I’ve not ridden it yet might be like a clownsxbike.
everyones a winner