Suzuki gt750 front brake splitter slim one

Post Reply
User avatar
Frankibaby7
Posts: 391
Joined: Tue Oct 15, 2019 6:46 pm
Location: Dartford

Suzuki gt750 front brake splitter slim one

Post by Frankibaby7 »

:D hi guys I'm looking for a slim front brake 3 way splitter that I can mount on the bike with the 2 horn bolts, alan kindly left me a bigger earlier splitter which was good of him but it's a bit big to go under the headlight ,so a slim version would be good ,cheers chaps .
Frankibaby. :D :roll: :oops: :lol: :mrgreen: :lol: :P
Frankibaby :lol:
User avatar
Alan H
Posts: 12104
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Suzuki gt750 front brake splitter slim one

Post by Alan H »

What was wrong with the brass one Franki?
Proof that four strokes are over complicated
User avatar
Frankibaby7
Posts: 391
Joined: Tue Oct 15, 2019 6:46 pm
Location: Dartford

Re: Suzuki gt750 front brake splitter slim one

Post by Frankibaby7 »

:D hi alan ,the brass one would be ok ,but its trying to mount it ,but I'll try it ,to be honest I forgot that one ,I thought it would only fit the braided hoses not the original hoses mate :D :roll: :lol: :mrgreen:
Frankibaby :lol:
User avatar
Frankibaby7
Posts: 391
Joined: Tue Oct 15, 2019 6:46 pm
Location: Dartford

Re: Suzuki gt750 front brake splitter slim one

Post by Frankibaby7 »

:tw hi alan just been on holiday, hope you an your family are well ,I've just got these hoses and metal pipes for the twin disk setup ,I have the 3 way splitter, can you advice me ,when fitting these metal pipes into the calipers do I apply any grease solvents for sealing alan ,and the same for the hoses mate, sorry for being thick lol :lol: :oops: :roll: :mrgreen: :lol: :tw tried to send pic too big grrrrr ,cheers alan .
Frankibaby :lol:
User avatar
Frankibaby7
Posts: 391
Joined: Tue Oct 15, 2019 6:46 pm
Location: Dartford

Re: Suzuki gt750 front brake splitter slim one

Post by Frankibaby7 »

Screenshot_20200802-191822_Gallery.jpg
Frankibaby :lol:
User avatar
Frankibaby7
Posts: 391
Joined: Tue Oct 15, 2019 6:46 pm
Location: Dartford

Re: Suzuki gt750 front brake splitter slim one

Post by Frankibaby7 »

And is it easy to put the right metal pipe on the correct caliper alan ,thanks mate :D :o :| :mrgreen: :lol: :D
Frankibaby :lol:
User avatar
Alan H
Posts: 12104
Joined: Fri Aug 05, 2011 6:38 am
Location: Wombwell, Republic of South Yorkshire

Re: Suzuki gt750 front brake splitter slim one

Post by Alan H »

Personally, I don't use anything on tbe threads, but you could wipe a bit of brake fluid on them for lube if you like. Dry 'loose' fit it all together and then turn the handlebars each way full lock to make sure nothing pulls anywhere.
You can guarantee that at least one hose or pipe will fit better in one place than another!!

Hope you had a good hol anyway - what was it, one day in spain and 2 weeks in your house? ;)
Proof that four strokes are over complicated
User avatar
rodent
Posts: 418
Joined: Sat Feb 17, 2018 10:22 pm
Location: Sunbury

Re: Suzuki gt750 front brake splitter slim one

Post by rodent »

Alan H wrote:Hope you had a good hol anyway - what was it, one day in spain and 2 weeks in your house? ;)

:lol:
User avatar
Frankibaby7
Posts: 391
Joined: Tue Oct 15, 2019 6:46 pm
Location: Dartford

Re: Suzuki gt750 front brake splitter slim one

Post by Frankibaby7 »

:D lol thanks alan ,no down my caravan in sunny ramsgate, only a week away but back now toget this bike done :roll: :oops: :D :lol: :lol:
Cheers mate :D
Frankibaby :lol:
Post Reply