T500L voltage regulator

The KettleClinic forum, it is free to become a member and free to use, we have additional information available to all members.
If you have not joined yet, do it now.

Please note the email for the signup should arrive within 15 minutes, if not, please check any spam or junk folders, if still not arrived please contact the forum
User avatar
malky
Posts: 1098
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: T500L voltage regulator

Post by malky »

mick 63 wrote: Wed Sep 07, 2022 9:43 pm No worries Malky , is mine off a 500 ? or possibly a 250 or 380 ?, i can't remember what its off but i've had all 3 bikes over the years , cheers .
Not sure Mick - the GT500 one just has one red/green wire and an earth so I'm hoping it will work OK with a bit of nodding
User avatar
malky
Posts: 1098
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: T500L voltage regulator

Post by malky »

mick 63 wrote: Wed Sep 07, 2022 9:43 pm No worries Malky , is mine off a 500 ? or possibly a 250 or 380 ?, i can't remember what its off but i've had all 3 bikes over the years , cheers .
Not sure Mick - the GT500 one just has one red/green wire and an earth so I'm hoping it will work OK with a bit of modding
User avatar
malky
Posts: 1098
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: T500L voltage regulator

Post by malky »

itsnotateapot wrote: Tue Sep 06, 2022 8:56 pm
malky wrote: Tue Sep 06, 2022 7:51 pm
Alan H wrote: Tue Sep 06, 2022 7:02 pm Try Richard in Sheffield, he just might have summat.
Cheers Al - will do
Sorry Malc dont have one,they are like rocking horse crap.
Cheers Rich - I've found a GT500 one that I think I can make do with
User avatar
malky
Posts: 1098
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: T500L voltage regulator

Post by malky »

Finally got round to a bit more investigative work - changed the rectifier for one of Alan's and plumbed in the two wire Gt500 regulator and bingo we are making power again 14.4 volts at 4k revs an just over 12 volts on tickover - result :)
Post Reply