The one Suzuki made in plastic, (why DID they do that in plastic ?)
I seem to remember someone made one from the kettle club in stainless, but who, and where do I find him or one of these gears ?
Who was it that re manufactored the water pump drive gear
- didge
- Posts: 1475
- Joined: Wed Nov 11, 2009 8:48 pm
- Location: Taunton Somerset TA4
- Contact:
- BAZ
- Posts: 3599
- Joined: Thu Jun 18, 2009 7:35 pm
- Location: Dudley west midlands
- Contact:
Re: Who was it that re manufactored the water pump drive gear
I think they are plastic or nylon and designed to break to save other damage. You can get new for about £30 and seem to last 20 years +
- yeadon_m
- Posts: 7401
- Joined: Sat Jan 02, 2010 7:10 am
- Location: Canterbury Kent
Re: Who was it that re manufactored the water pump drive gear
Like you say Baz, there is quite a complicated set of gears and shafts to drive the water pump and tacho cable. If either pump or cable was sticky, the poor gears/shafts could get damaged and require a strip down. The plastic gear is 'sacrificial'. Its also a lot quieter I have been told. Those who fitted an ? aluminium gear found it very noisy.
Cheers,
MikeY
Cheers,
MikeY
- didge
- Posts: 1475
- Joined: Wed Nov 11, 2009 8:48 pm
- Location: Taunton Somerset TA4
- Contact:
Re: Who was it that re manufactored the water pump drive gear
According to Crooks the plastic one is obselite.
Mine has a crack across either side of it which has been drilled to stop it creeping any further, but still has, so I've drilled a couple more small holes in it.
Mine has a crack across either side of it which has been drilled to stop it creeping any further, but still has, so I've drilled a couple more small holes in it.
-
- Posts: 51
- Joined: Sun Dec 27, 2009 11:38 pm
Re: Who was it that re manufactored the water pump drive gear
they were made of plastic because if the engine developed a water pump problem it would break the the plastic gear instead of damaging the metal gearsdidge wrote:The one Suzuki made in plastic, (why DID they do that in plastic ?)
I seem to remember someone made one from the kettle club in stainless, but who, and where do I find him or one of these gears ?
-
- Posts: 51
- Joined: Sun Dec 27, 2009 11:38 pm
Re: Who was it that re manufactored the water pump drive gear
the remanufactured water pump is available on ebay just look up the seller the kettle club about £30 ishdidge wrote:According to Crooks the plastic one is obselite.
Mine has a crack across either side of it which has been drilled to stop it creeping any further, but still has, so I've drilled a couple more small holes in it.
- didge
- Posts: 1475
- Joined: Wed Nov 11, 2009 8:48 pm
- Location: Taunton Somerset TA4
- Contact:
Re: Who was it that re manufactored the water pump drive gear
I've got one now, a NOS one about a month ago, and it was £30.
Cheers anyway BHB.
Cheers anyway BHB.