The header says it all
PROJECT TETANUS
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
PROJECT TETANUS
Last edited by rodent on Sun Aug 23, 2020 9:03 am, edited 1 time in total.
- Alan H
- Posts: 12123
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: If I was to start a "build" thread, is this the section?
Only if you don't count it as a disease. Just an affliction!
Unless it's really poorly and needs putting out of its misery, of course.
Unless it's really poorly and needs putting out of its misery, of course.
Last edited by Alan H on Sat Mar 03, 2018 10:41 am, edited 1 time in total.
Proof that four strokes are over complicated
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: If I was to start a "build" thread, is this the section?
After restoring the bitsAlan H wrote:Only if you don't count it as a build. Just a restoration!
Unless it's in bits and you have to build it, of course.
- mizzytheman
- Posts: 2227
- Joined: Tue Dec 28, 2010 1:17 pm
- Location: Knowsley, Liverpool
Re: If I was to start a "build" thread, is this the section?
What Alan and Kev are trying to say is yes.
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: If I was to start a "build" thread, is this the section?
Killjoymizzytheman wrote:What Alan and Kev are trying to say is yes.
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
Re: If I was to start a "build" thread, is this the section?
Thanks for the reply Gents
If a Moderator views this thread, could you change the title to "Project Tetanus" please
Is there a source for repro seat bases, or is it a case of trying to buy a good secondhand one?
Pic of the seat base, she's gonna need a bit of work
If a Moderator views this thread, could you change the title to "Project Tetanus" please
Is there a source for repro seat bases, or is it a case of trying to buy a good secondhand one?
Pic of the seat base, she's gonna need a bit of work
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
Re: If I was to start a "build" thread, is this the section?
I might pop it in the vinegar tub and see how it turns out, maybe I can braze it back together
- rodent
- Posts: 418
- Joined: Sat Feb 17, 2018 10:22 pm
- Location: Sunbury
Re: If I was to start a "build" thread, is this the section?
I wheeled old "Tetanus" out of the shed today and blew the cobwebs off it, and found this item on the ground.
Is it a factory item or an aftermarket piece? It has fuses in it.
Is it a factory item or an aftermarket piece? It has fuses in it.
- canaletto5
- Posts: 5228
- Joined: Tue Jul 23, 2013 8:43 pm
- Location: Derbyshire
Re: If I was to start a "build" thread, is this the section?
Not factory fitted mate. A lot of people added fuses to main circuits because the original is just one fuse on the battery output. Thing is, that means you should find a few cut wires with terminals on that would have connected to the box. Kev
- Alan H
- Posts: 12123
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: PROJECT TETANUS
A bitta T cut and it'll be good as new.
.
.
.
.
.
Ish.
.
.
.
.
.
Ish.
Proof that four strokes are over complicated