Master Cylinder

Post your problems / information on the smaller GT Models here
Post Reply
SaesnegShaun
Posts: 4
Joined: Fri Dec 17, 2021 10:09 pm

Master Cylinder

Post by SaesnegShaun »

Trying to get a repair kit for my master cylinder.
CMSNL says its part number 5960045821 but fleabay says that part number is for nissan mC only
Which one do I have please?
Image
User avatar
malky
Posts: 1096
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: Master Cylinder

Post by malky »

That's an early "K" model cylinder thought they were all Nissin ones
SaesnegShaun
Posts: 4
Joined: Fri Dec 17, 2021 10:09 pm

Re: Master Cylinder

Post by SaesnegShaun »

malky wrote: Tue Jan 04, 2022 12:13 pm That's an early "K" model cylinder thought they were all Nissin ones
Ok thanks,
Theres loads of different kits around. Is it worth stumping up the extra for genuine suzuki parts or are pattern parts good enough?
User avatar
malky
Posts: 1096
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: Master Cylinder

Post by malky »

I've always tried to use genuine with brake parts if possible - you best bet is to measure the bore size to make sure you order the correct size repair kit - I find Suzy Two or Simon Craddock at Abermoto the best people to source them from
Mal.
SaesnegShaun
Posts: 4
Joined: Fri Dec 17, 2021 10:09 pm

Re: Master Cylinder

Post by SaesnegShaun »

malky wrote: Wed Jan 05, 2022 2:52 pm I've always tried to use genuine with brake parts if possible - you best bet is to measure the bore size to make sure you order the correct size repair kit - I find Suzy Two or Simon Craddock at Abermoto the best people to source them from
Mal.
Thanks Mal,
I've ordered the correct genuine kit from Suzy Two
User avatar
malky
Posts: 1096
Joined: Sat Dec 19, 2009 3:25 pm
Location: swansea south wales

Re: Master Cylinder

Post by malky »

Hope it sorts everything out for you
Mal.
User avatar
slosher
Posts: 901
Joined: Fri Sep 23, 2011 6:55 pm
Location: Walsall,Black Country

Re: Master Cylinder

Post by slosher »

Old post new question :tw
What is the difference between a Asco/Aishin and a Nissin master cylinder kits :? piston size or seal difference or what
Are the seal kits interchangeable with either body :?:
Iv'e only had the 550 for 22yrs and didn't know of the two types having real problems trying to get lever pressure :evil:
I know the JK reservoirs are entirely different to LMAB so which is which when replacing with a seal kit.

Thanks Dave
GT750L
GT550L
TL1000 97s
T140V
Loctite Trained Engineer :lol:(since having the Bonnie)
Post Reply