Air Filter GT550
- tato81
- Posts: 179
- Joined: Fri Jul 14, 2017 6:58 pm
Air Filter GT550
I need AIR FILTER for GT550 LMAB. Can you recommend something? Or is the original only an option.
- tato81
- Posts: 179
- Joined: Fri Jul 14, 2017 6:58 pm
-
- Posts: 3120
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Air Filter GT550
I have what you need but just the top not the ducks foot/rubber manifold. Send me a PM if you want it and i will take photo's
NO SMOKE .......NO POKE
- slosher
- Posts: 901
- Joined: Fri Sep 23, 2011 6:55 pm
- Location: Walsall,Black Country
Re: Air Filter GT550
Hi tato81
You can use K & N type cone shaped filters iv'e had 2 fitted on my 550L for years
Dave
You can use K & N type cone shaped filters iv'e had 2 fitted on my 550L for years
Dave
GT750L
GT550L
TL1000 97s
T140V
Loctite Trained Engineer (since having the Bonnie)
GT550L
TL1000 97s
T140V
Loctite Trained Engineer (since having the Bonnie)
-
- Posts: 3120
- Joined: Wed Sep 26, 2012 7:33 pm
- Location: Prestatyn.Wales
Re: Air Filter GT550
NO SMOKE .......NO POKE
- Alan H
- Posts: 12110
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: Air Filter GT550
Try this guy in Holland - www.Knalnaarpotz.nl - I got my last ones off him.
Click the link, then the air/fuel square. They're €36 for 2.
Do you only need the foam outers, or the metal inners as well. If you'd mentioned it, I would have put a couple in with the snorkel!!
Click the link, then the air/fuel square. They're €36 for 2.
Do you only need the foam outers, or the metal inners as well. If you'd mentioned it, I would have put a couple in with the snorkel!!
Proof that four strokes are over complicated
- tato81
- Posts: 179
- Joined: Fri Jul 14, 2017 6:58 pm
Re: Air Filter GT550
I don't have foam outers and the metal inners. I need both
- Gary66
- Posts: 710
- Joined: Sun Jan 05, 2014 10:53 am
- slosher
- Posts: 901
- Joined: Fri Sep 23, 2011 6:55 pm
- Location: Walsall,Black Country
Re: Air Filter GT550
What set up have you got inside the airbox
The cone shaped filters i have sleeve over black plastic holes with the large diameter and literally fit back to back
Drill a clearance hole in the small dia of the cone plate to allow the rod through to fix the chrome side pans on.
GT750L
GT550L
TL1000 97s
T140V
Loctite Trained Engineer (since having the Bonnie)
GT550L
TL1000 97s
T140V
Loctite Trained Engineer (since having the Bonnie)