NEW AND EXISTING MEMBERS PLEASE READ.....
- Eastham
- Posts: 86
- Joined: Tue Oct 27, 2020 4:42 pm
- Location: Guernsey
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Originally from The Wirral, currently Exiled in Guernsey
- normski
- Posts: 24
- Joined: Sun Jul 26, 2020 4:37 pm
- Location: Sheffield, South Yorkshire
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Hi itsnotateapot, I'm in Loxley, Loxley Valley ( 2 miles from Hillsborough) West Sheff and i have to agree with Garry66 some of the finest, and as I'm retired I'm a regular visitor on my Triumph Speed twin 1250 - can't get enough. Err - I do have a couple of Suzis a GT750 B and a GT550 M. - and 2 other far eastern machines.
Thanks Allan H. And you're spot on about the road out of Grimbo into God's county , Fish or no fish - and I like Madhouses there full of saine People
When the weather picks up and this Chinese S*** as cleared up us Yorkies should meet up for ride , unless it's here to stay!! its the only thing they ever have made that as lasted
.
Michael , Heriford is nice as well, I'v work down there, but its always good to get back to YORKSHIRE.
.
Thanks Allan H. And you're spot on about the road out of Grimbo into God's county , Fish or no fish - and I like Madhouses there full of saine People



When the weather picks up and this Chinese S*** as cleared up us Yorkies should meet up for ride , unless it's here to stay!! its the only thing they ever have made that as lasted



Michael , Heriford is nice as well, I'v work down there, but its always good to get back to YORKSHIRE.


The trouble with birthdays ... the more you have the less you have to look forward to.
.

- normski
- Posts: 24
- Joined: Sun Jul 26, 2020 4:37 pm
- Location: Sheffield, South Yorkshire
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Hi Eastham. Is that where Gurning comes from???




The trouble with birthdays ... the more you have the less you have to look forward to.
.

- normski
- Posts: 24
- Joined: Sun Jul 26, 2020 4:37 pm
- Location: Sheffield, South Yorkshire
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Hello - It's Normski here in my dining room in Sunny Sheffield South Yorkshire. 

The trouble with birthdays ... the more you have the less you have to look forward to.
.

- stevewharton
- Posts: 2223
- Joined: Mon Jul 05, 2010 11:01 am
- Location: Grimsby, Lincolnshire.
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Hi Normski, or is it Alan H in disguise???
Because South Yorkshire? Mmmm, 72? Mmmm, disrespecting Grimsby? Mmmm, still haven't forgiven you for that slur
Anyway whoever you are, if Grimsby is so bad, why do all you Yorkies come through here in your thousands, to get to Cleethorpes??? Can't you go round the long way??? 
Because South Yorkshire? Mmmm, 72? Mmmm, disrespecting Grimsby? Mmmm, still haven't forgiven you for that slur


Look, my paintwork hasn't got "Fish scales"
they're "Dragon scales" right!!! However, after some thought, I will accept "Black Marlin" or "Swordfish", but definitely not "Haddock" or "Cod".

- Alan H
- Posts: 12215
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Many years ago I worked at Cleethorpes crem commissioning a couple of new cremators, so make of that what you will!! 

Proof that four strokes are over complicated
-
- Posts: 3
- Joined: Sun Mar 28, 2021 8:23 pm
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Hi there guys, I have just registered on this site, thankx for accepting me. I am from Lincoln UK
-
- Posts: 3
- Joined: Sun Mar 28, 2021 8:23 pm
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Any help please? I am struggling to get any fuel through on my GT380'L'
Can you check if the fuel vacuum is working?
If I pass air through the vacuum pipe that fits onto the fuel tap, its vents through the middle carb only, ideas please????
Can you check if the fuel vacuum is working?
If I pass air through the vacuum pipe that fits onto the fuel tap, its vents through the middle carb only, ideas please????
- Alan H
- Posts: 12215
- Joined: Fri Aug 05, 2011 6:38 am
- Location: Wombwell, Republic of South Yorkshire
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Better off starting a new thread - this one is for 'New and existing members, please read' so might be getting missed.
In the meantime, it looks like your tap isn't very well. Does it work in 'Prime' position?
In the meantime, it looks like your tap isn't very well. Does it work in 'Prime' position?
Proof that four strokes are over complicated
-
- Posts: 28
- Joined: Sun Apr 01, 2018 2:02 pm
Re: NEW AND EXISTING MEMBERS PLEASE READ.....
Orsett essex